OPTIPLEX 3015 NEO

Produkt: Laser

Precision 2D Fiber Laser cutting machine

The OPTIPLEX 3015 NEO is a 2D fiber laser cutting machine available in a wide range of powers, from 3 kW to 20 kW, and different configuration, with Beam Diameter Control or with Beam Diameter Control and Beam Shaping Technology. Mazak’s advanced Beam Shaping technology, complemented by Beam Diameter Control, delivers asuperior cutting qualityfor sheet metal processing.

The proprietary Mazak Multi-Control Torch 3 cutting head enables Intelligent Functions that drastically reduces setting and cutting time by automatically change setting of the machine. The new MAZATROL SmoothLxCNC control system features a double 21,5-inc touch display and new GraphicalUser Interface and the Human Machine Interface ensuring fast operation.
Operator access to the cutting area is enhanced by front and side access doors that open the full width and length of the machine.

Key features:

  • Unique combination of Beam Shaping Technology and Beam Diameter Control ensures the best cutting performance on various materials and thicknesses
  • Front and side doors for easy accessibility
  • Mazak proprietary Multi-Control Torch 3 and Intelligent Functions allow high-quality and high-speed cutting
  • New MAZATROL SmoothLxCNC control provides fast operation
  • Available from 3kW to 20 Kw Fiber laser resonator configuration
  • Max. workpiece size: 1525mm x 3050mm

 

The state-of-the-art beam shaping technology:

Beam Shaping Technology enables to change the power distribution of the laser beam on the workpiece in a controllable and repeatable manner to achieve the best processing results.

 

Thanks to this technology, the operator can switch from a small flat-top to a large donut with all the shapes in between.

On the left is a workpiece cut with standard technology. In the middle and on the right a cut with BST in 2 different modes, resulting in 2 different kerf widths.

Maskine specifikationer

15.0 kW Laser Værdi
Machine Specifications Axis processing movement Flying optics
Maximum work piece size X-Y 1525mm x 3050 mm
Work table height 900 mm
Axis travel X-Y 1595mm x 3110 mm
Z axis travel 135 mm
Rapid traverse rate X-Y 120 m/min
Rapid traverse rate Z 60 m/min
Axis drive system X1/X2 - Y Rack and pinion
Axis drive system Z Ball screw
Positional accuracy X-Y +/-0.05/500mm
Positional accuracy Z +/-0.01/100mm
Cutting head Mazak multi-control torch 3.0
Z axis profiler Non contact type
Lighting system LED light
Operation status indicator lights Yellow/laser source on, red/laser beam on
Programmable assist gas ports 3 types(Oxygen,air,and assist gas)
Noise level laser Maximum 80 dBA
Safety interlock system Door, shuttle door, hood
Machine base Precision machined single cast iron base
System weight 14800kg
Laser Generator Specifications Generator style Fiber laser
Power stability +/- 1.0%
Laser wave length 1,080.00 Nm
Laser power mode selection CW, pulsed
Circuit cooled Torch, laser
Name MAZATROL SmoothLx
Data input Touch panel
Monitor 21.5" wide full monitor
Graphic preview display 2D tool path
Memory storage 64 GB
Program storage 1 GB
Input ports USB 2.0 * 2ports
Network connection LAN 1 Port ( 100/1000 BASE)
Minimum input command 0.001 mm
Servo System Digital
Position system Encoder
Control method Semi-closed loop
Maximum work piece weight per pallet 1,500 kg
Maximum loading height of work piece Upper pallet 50mm, Lower pallet 40mm
Maximum work piece size X-Y 1525mm - 3050mm
Work piece reference 2 reference stops or laser edge find
Clamps 2
Number pallets 2
Camber 3 mm
Angle 6 mm
Flatness 2 mm